SAF CB (Cardboard)

Introduction

Pleated cardboard or accordeon filter is designed to collect all solid or liquid particles in the air (adhesives, paint, fibres, tar, lacquer, transparent coatings, teflon, varnish, powder, etc.).
This filter is designed to fit all types of spray booths, horizontal or vertical. The cardboard filter with its inertia separation system deposits and maintains particles on the walls without restricting air flow.




Product MainFeatures<:
1 This filter is suitable in all spray booth with horizontal and vertical airflow.
2 Lifetime up to 6 times longer than other filtering medias on the market.
3 Easy installation and manipulation.
4 Environment friendly materials according to ISO 14000.
5 Adapted to filtration of solvent paints and water based paints.

Pleated cardboard or accordeon filter is designed to collect all solid or liquid particles in the air (adhesives, paint, fibres, tar, lacquer, transparent coatings, teflon, varnish, powder, etc.).
This filter is designed to fit all types of spray booths, horizontal or vertical. The cardboard filter with its inertia separation system deposits and maintains particles on the walls without restricting air flow.
Pleated cardboard filter is made of two layers of recycled kraft paper, perforated, pleated and glued. The quality of Kraft paper (250g/m²) guaranties rigidity of the filter in all positions. The V shape of the filter creates a Venturi effect (increase of speed of airflow inside the filter) and causes airflow containing overspray particles to change direction. Overspray particles which are heavier than air will stick inside the filter while clean air will go out of the filter.

RAW MATERIAL & TREATMENTS
Recycled intercraft cardboard (250 g/m²) Light water repellent treatment
Perforation, pleating and assembly with vynilic glue
Retention capacity :5 to 18kg/m² (depending density particles)
Filtration efficiency :up to 95% (depending sprayed product)
Air flow rates :0,30 to 1m/s
Pressure drop at 0,5m/s :20 Pa

STANDARD DIMENSIONS
Reference Height x Operating length Thickness
FCPN1000 1m x 10,35m= 10m² 65 mm
FCPN900-10 0.90mx 11,20m= 10m² 65 mm
FCPN700-10 0,70mx 13,40m= 10m² 65 mm
FCPN750-10 0,75mx 13,40m= 10m² 65 mm
Other dimensions on request

RECOMMENDED OPERATING CONDITIONS
Recommended airflow velocity : 0.30 to 1.00 m/s
irflow typical values : 1,200 to 3,600 m/h.m²
Δp at 0.5 m/s : 2 mmHO / 20 Pa
Highest acceptable dep. value at 0.5 m/s : 15 mmHO / 150 Pa
Recommended number of pleats per meter 25
Applications :
This filter is well adapted to filtration of any wet overspray particles in all industries :
-    Woodworking
-    Metalworking
-    Plastic / Composite industries
-    Car manufacturers and subcontractors






 
Related Products